Anchors - Blowout Sale! Save up to 52%


Blowout Sale! Up to 52% off on Anchors at Sunny Doors. Top brands include LinkEZ, TOGGLER, uxcell, IKEA, Hilitchi, Panorama Cable & Hardware, Hillman, Simpson Strong-Tie, CONFAST, AckBrands, Swpeet, Eskimo, & Grip-It. Hurry! Limited time offers. Offers valid only while supplies last.



One Way Anchor Vises for 12-13 Gauge Wire with Screws - 10 Pack | WireVise | Grape Arbor | Wire Trellis | Anchor Vise
By LinkEZ
In Stock
$29.50
$29.45

mpn: LinkEZ, ean: 0851535007077,

4.8 out of 5 stars with 92 reviews
One Way Anchor Vises make creating high tension wire applications quicker and easier than all other methods. Just drill a hole through the end post, pull the wire through, attach the wire vise, tap it into the hole, insert the screws and you're done! The most recommended and most popular gauge wire for creating vineyard trellis systems is 12.5 gauge high tensile wire. It's easier to work with than 8-10 gauge wire and provides the perfect amount of support for vine growing. The recommended gauge


TOGGLER SnapSkru SPM Mini Self-Drilling Drywall Anchor, Glass-Filled Nylon, Made in US, For #6 to #8 Fastener Sizes (Pack of 100)
By TOGGLER
In Stock
$16.75
$12.99
You Save: 22%

mpn: 30031, ean: 0036296441029,

4.8 out of 5 stars with 98 reviews
The TOGGLER SnapSkru SPM Mini self-drilling drywall anchor installs into 3/8''- to 5/8''-thick drywall ceilings and walls without requiring a predrilled hole, and is made in USA. Its corrosion-resistant glass-filled nylon body installs into drywall with a Phillips driver, a hand drill, or a screw gun. The anchor's positive stop mechanism prevents the anchor from being driven too far into the drywall. The anchor accepts #6 to #8 size sheet metal screws with a length equal to the thickness of the


uxcell M8x60mm Wall Concrete Brick Expansion Screws Closed Hook Anchor Bolts 2pcs
By uxcell
In Stock
$11.71
$11.11
You Save: 5%

mpn: a16062200ux0438, ean: 0602451823605,

4.7 out of 5 stars with 34 reviews
M6 male thread Expansion screw hook anchor bolt with flat washer and hex nut.Closed hook bolts suitable for secure and reliable fixing of items and fixtures to concrete, brick, walls and any solid surface.Installation methods:  Select a chopping bit with the same diameter as expansion screw casing, and install it on the electric drill for punching. The depth of the hole should be equal to the length of the bolt. Then insert the expansion bolt set into the hole. Remember: Do not screw off


Ikea FIXA 260-Piece Screw and Plug Set
By IKEA
In Stock
$14.94
$14.39
You Save: 4%

mpn: 001.692.49, ean: 5054186138106,

4.2 out of 5 stars with 29 reviews
260 piece Screw set and plugs for Ikea Furniture.


Hilitchi 122 Piece Plastic Self Drilling Drywall Hollow-wall Anchor Molly Bolt Toggle Bolt with Screws Kit
By Hilitchi
In Stock
$10.98

mpn: FBA_HPD122,

4.5 out of 5 stars with 79 reviews
This anchor set is perfect for mounting a wide variety of objects in drywall and other surfaces where simple fasteners are impractical Set includes plastic self drilling hollow-wall anchor, molly bolt, toggle bolt with self-tapping screws The ribs on the plastic anchors prevent the anchor from turning in the hole during installation The molly bolts Hollow wall anchors with pointed ends can pierce drywall using just a hammer These toggle bolts are anchors for use in hollow walls and hollow


Swageless Lag Screw Terminal Stainless Steel Marine Grade T316 for 1/8" Cable (Lot of 10)
By Panorama Cable & Hardware
In Stock
$89.97

mpn: LSTSL-18, ean: 0712760972847,

4.8 out of 5 stars with 25 reviews
These Panorama Swageless Lag Screw Terminals are for cable runs that attach to the surface of a wood post or wall. The lag screw is about 2''. Overall length of the terminal is about 3.75''. The Lag Screw Terminals should be paired with a turnbuckle or other tensioning hardware in order to insure proper cable tension for your deck railing. The terminals are made from T316 Marine Grade Stainless Steel.These high quality stainless steel cable railing hardware kit is perfect for planning your own


The Hillman Group 370988 Wedge Anchor, 1/2 X 3-3/4-Inch, 12-Pack
By Hillman
In Stock
$18.99
$15.30
You Save: 19%

mpn: 370988, ean: 0008236433463,

4.2 out of 5 stars with 90 reviews
The Power-Stud is a torque controlled, wedge expansion anchor that is designed for concrete applications. Has various DOT approvals including Cal Trans listing for ''Stud Mechanical Expansion Anchors''. It is building code approved and can also be used with treated lumber.Made of Steel/Zinc. Includes nut and washer. Use in solid concrete, brick and stone.


TOGGLER SnapSkru SPM Mini Self-Drilling Drywall Anchor with Screws, Glass-Filled Nylon, Made in US, For #6 to #8 Fastener Sizes (Pack of 50)
By TOGGLER
In Stock
$17.84

mpn: 30032, ean: 0036296300326,

4.9 out of 5 stars with 149 reviews
The TOGGLER SnapSkru SPM Mini self-drilling drywall anchor installs into 3/8''- to 5/8''-thick drywall ceilings and walls without requiring a predrilled hole, includes #6 x 1-1/4'' screws, and is made in USA. Its corrosion-resistant glass-filled nylon body installs into drywall with a Phillips driver, a hand drill, or a screw gun. The anchor's positive stop mechanism prevents the anchor from being driven too far into the drywall. Inserting an included screw activates the anchor's jaw, locking


SIMPSON STRONG TIE SET-XP22 22OZ EpoxyTie Cartridge
By Simpson Strong-Tie
In Stock
$49.99
$32.99
You Save: 34%

mpn: SET-XP22, ean: 0707392678205,

4.4 out of 5 stars with 39 reviews
22 oz, epoxy tie cartridge, ideal for anchoring threaded rod, rebar & smooth dowels in a variety of base materials, offers strength & versatility across a wide variety of applications, a 1:1 two component, high solids epoxy based anchoring adhesive formulated for optimum performance in both cracked & uncracked concrete, teal color identifies as a high performance adhesive for adverse conditions, resin & hardener are dispensed & mixed simultaneously through the mixing nozzle, 24 month shelf life


TOGGLER ALLIGATOR AF6 Flanged Anchor, Polypropylene, Made in US, For #6 to #12 Fastener Sizes (Pack of 100)
By TOGGLER
In Stock
$15.75
$14.98
You Save: 5%

mpn: 13101, ean: 0036296131012,

4.0 out of 5 stars with 136 reviews
The TOGGLER ALLIGATOR AF6 flanged anchor provides a secure hold in solid and hollow concrete, brick, stone, and drywall, and is made in USA. Once inserted into a 1/4'' drilled hole in a wall, ceiling, or floor, the anchor accepts a #6 to #12 size screw with a thread length at least equal to the thickness of the item being fastened plus 1-3/8''. The anchor head is flanged for additional stability compared to a flush-mount head when installing into hollow material and has fins that grip the


CONFAST 1/2" x 4-1/4" Hot-Dipped Galvanized Wedge Anchor (Box of 25)
By CONFAST
In Stock
$31.99

mpn: WAG12414,

4.7 out of 5 stars with 51 reviews
ApplicationsThe anchor is made from Carbon Steel, and is Hot-Dipped Galvanized. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Damp environment.Hole Diameter/Bit DiameterThe anchor requires a 1/2'' hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor The diameter


Simpson Strong Tie THD37300H 3/8-Inch by 3-Inch Titen HD Zinc Plated Heavy Duty Screw Anchor for Concrete/Masonry, 50 per Pack
By Simpson Strong-Tie
In Stock
$43.65
$34.07
You Save: 22%

mpn: THD37300H, ean: 0707392116813,

4.6 out of 5 stars with 139 reviews
The Titen HD anchor is a patented, high strength screw for concrete and masonry. It is design for cracked and uncracked concrete; a requirement that the 2009 IBC places on post-installed anchors. The self-cutting, non-expansion characteristics of the Titen HD anchor make it ideal for structural applications, even at reduced edge distances and spacings. Recommended for permanent dry, interior non-corrosive environments or temporary outdoor applications.Easy post-installation inspection head


CONFAST 3/4" x 6-1/4" Wedge Anchor Zinc Plated (Box of 20)
By CONFAST
In Stock
$51.99

mpn: WA34614,

4.5 out of 5 stars with 148 reviews
ApplicationsThe anchor is made from Carbon Steel, and is Zinc Plated. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Dry environment.Hole Diameter/Bit DiameterThe anchor requires a 3/4'' hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor The diameter of the ancho


The Hillman Group 370826 Hex Head Sleeve Anchor, 5/16 X 2-1/2-Inch, 35-Pack
By Hillman
In Stock
$20.99
$20.83

mpn: 370826, ean: 0008236561548,

4.6 out of 5 stars with 51 reviews
Concrete Sleeve Anchors' design allows them to anchor into concrete, brick and block. Turning the nut pulls the working end of the sleeve anchor up through the sleeve, expanding and anchoring itself securely in the concrete, brick or block.Expansion type anchors used to fasten fixture into a variety of base material. Pre-drilling required. Made of Steel/Zinc.


CONFAST 3/4" x 5-1/2" Wedge Anchor Zinc Plated (Box of 20)
By CONFAST
In Stock
$46.99

mpn: WA34512,

4.2 out of 5 stars with 147 reviews
ApplicationsThe anchor is made from Carbon Steel, and is Zinc Plated. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Dry environment.Hole Diameter/Bit DiameterThe anchor requires a 3/4'' hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor The diameter of the ancho


120 Pieces - 60 Screws (#8), 60 Self Drilling Zinc Drywall Anchors - 50 Pound Capacity
By AckBrands
In Stock
$14.99

mpn: E7-NIWP-MICL, ean: 0859669007024,

4.0 out of 5 stars with 142 reviews
Box contains: 60 1 1/2'' Zinc Drywall Anchors 60 1 1/4'' Screws 1 Plastic Container.50 POUND CAPACITY - 1 ½ inch anchors paired with 1 ¼ inch screws provide a 50 pound capacity for items being hung flush to the wall. Don't let your valuables hang from a piece of plastic, choose quality metal anchors for peace of mind.. FRUSTRATION FREE - Don't trust your weekend project to plastic anchors that bend, break, and cause nothing but aggravation. These durable zinc anchors chew through any wall


Swpeet 196Pcs Assorted Sizes Hollow Drywall Anchors Kit, Plastic Self Drilling Drywall Ribbed Anchors Assortment with Screws Perfect for Fixing Curtains, Calligraphy, Wall Cabinets, Lamps
By Swpeet
In Stock
$25.99
$12.59
You Save: 52%

ean: 0682838484162,

4.1 out of 5 stars with 30 reviews
Instructionn: 1. Drilling holes on the wall first, the depth and diameter of punching must correspond to the size of the product. 2, The plastic anchors is knocked into the wall with a rubber hammer. 3, Anchors aligns the holes to ensure that it can match the size of Wall anchors. 4, Insert the screw and twist clockwise. 5, Make sure that the screws are aligned with the Hallow Wall anchors. Package Includes: Yellow 6 * 30 ------ 10PCS with 10PCS self-tapping screws 6 * 40 ------ 10PCS with


TOGGLER Toggle TC Commercial Drywall Anchor, Polypropylene, Made in US, 5/8" to 3/4" Grip Range, For #6 to #14 Fastener Sizes (Pack of 100)
By TOGGLER
In Stock
$24.75
$17.99
You Save: 27%

mpn: 11011, ean: 0036296421038,

4.9 out of 5 stars with 113 reviews
The TOGGLER Toggle TC commercial drywall anchor provides a firm hold in 5/8''- to 3/4''-thick drywall, and is made in USA. The anchor is made from polypropylene that resists corrosion, is nonconductive for anchoring electrical components, and is low-friction to facilitate screw installation. The anchor hammers into a 5/16'' drilled hole until flush with the mounting material's surface. Before a #6 to #14 size screw with a minimum thread length of 1-1/2'' can be inserted into the anchor to


Eskimo 69138 Ice Shelter Anchors, 2-Pack
By Eskimo
In Stock
$14.99
$12.64
You Save: 16%

mpn: 69138, ean: 7535001392494,

4.7 out of 5 stars with 45 reviews
The convenient Eskimo Ice Anchors will secure your portable ice shelter in windy conditions. These self-tapping ice anchors are easier to grip and will not bend under pressure.Self-tapping Ice Anchors are easy to grip. Will not bend under pressure. Solid, stainless steel construction. Easy-to-use screw-in style.. Two per package.


GripIt Drywall Anchor Fixing Kit Holds Up To 250 Pounds or 113 Kilograms Of Weight. Perfect For Hanging Heavy Such as TVs, Boilers, Cabinets on Plasterboard Walls.. Removable and Reusable Screws (32 Fixings)
By Grip-It
In Stock
$21.99
$11.35
You Save: 48%

mpn: GSTARTKIT-001, ean: 0700953975362,

4.1 out of 5 stars with 78 reviews
There are plain plasterboard fixings and there are GripIt fixings. These ultra strong plasterboard fixings are crafted from a revolutionary design that provides a strong fix when hanging anything that weighs up to 400lbs. Our innovative product that took the UK world by storm as the winner of the BBC show Dragon's Den. The patented design is masterfully engineered to provide a safe and secure wall fixings that works 100 percent of the time so that you can confidently hang your flat screen TVs



Viewing Page 1 of 3

View more products in Nails, Screws & Fasteners.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - sunnydoors.com. All Rights Reserved.