Browse Our Catalog

Clock Movements - Page 3 - Super Savings! Save up to 36%


Super Savings! Up to 36% off on Clock Movements at Sunny Doors, Page 3. Top brands include Dhorcas Designs, TIKROUND, Quartex, SupertownAZ, Young Town 24 hour movement, Dans Clock Shop, Mudder, FunnyToday365, Hicarer, A-n-b collectibles, & FindingKing. Hurry! Limited time offers. Offers valid only while supplies last.



Dhorcas (#01D) 3/16'' Threaded Motor and Curvy Long Distressed Black 8 3/4'' Hands, Quartz Clock Movement and Replacement Motor kit (3/16'' Thread Shaft)
Dhorcas (#01D) 3/16" Threaded Motor and Curvy Long Distressed Black 8 3/4" Hands, Quartz Clock Movement and Replacement Motor kit (3/16" Thread Shaft)
By Dhorcas Designs
In Stock
$14.55

mpn: unknown, ean: 0759883839121,

4.2 out of 5 stars with 122 reviews
Now you can make that large clock with this high torque quartz motor (ultra quiet) and 8-3/4'' metal balanced hands. This is a continuous motion movement, no stepping/advancing of gears, super quiet. Those of you with keen hearing will greatly appreciate it's quietness. The hands have a lovely Spade design and comes with a plastic protection film that you peel off. Also comes with an instruction sheet. Requires one AA battery to operate (not included). See information below: Mute/quiet, travel


Quartz DIY Wall Clock Movement Mechanisms Battery Powered DIY Repair Parts Replacement with 2 Long Hands,3/10 Inch Maximum Dial Thickness,29/32 Inch Total Shaft Length. …
Quartz DIY Wall Clock Movement Mechanisms Battery Powered DIY Repair Parts Replacement with 2 Long Hands,3/10 Inch Maximum Dial Thickness,29/32 Inch Total Shaft Length. …
By TIKROUND
In Stock
$10.99

mpn: c-001, ean: 0738770835798,

4.3 out of 5 stars with 13 reviews
Features: Kindly note: This clock Mechanism can not install the second hand. Easy and simple design Suitable for repairing, replacing or making a clock Material: plastic and aluminum Second hand motion: Step Accuracy Within ±30seconds deviation each month (in normal temperature) Battery: one 1.5V Carbon-zinc batteries only,not included. Please DO NOT USE Alkaline battery,Rechargeable batteries,they will damage the movement. Dimensions: Case size: approx. 56 x 56 x 16 mm (2.2 x 2.2 x 0.65


Youngtown 12888 Quartz DIY Wall Clock Movement Mechanism DIY Repair Parts Replacement Fit Dials up to 40 cm/15.7 inches in Diameter.
Youngtown 12888 Quartz DIY Wall Clock Movement Mechanism DIY Repair Parts Replacement Fit Dials up to 40 cm/15.7 inches in Diameter.
By TIKROUND
In Stock
$10.99

mpn: 12888STC1+N01095, ean: 0738770835699,

4.8 out of 5 stars with 47 reviews
Features: Easy and simple design Suitable for repairing, replacing or making a clock. Material: plastic and aluminum. Second hand motion: SWEEP.(Silent Movement) Accuracy Within ±30seconds deviation each month (in normal temperature). Battery: one 1.5V Carbon-zinc batteries only,not included. Please DO NOT USE Alkaline battery,Rechargeable batteries,they will damage the movement. Dimensions: Case size: approx. 56 x 56 x 16 mm (2.2 x 2.2 x 0.65 inches) Total hour hand length: approx. 172


Original Rhythm Quartz DIY Wall Clock Movement Mechanism DIY Repair Parts Replacement
Original Rhythm Quartz DIY Wall Clock Movement Mechanism DIY Repair Parts Replacement
By TIKROUND
In Stock
$10.99

mpn: 1102X00R+N9101.152, ean: 0738770835774,

4.7 out of 5 stars with 146 reviews
Product Description: Kindly note: the product has 3 hands. The second hand has a brass cap, instead of the minute nut. For the 8th tip in the instruction, lightly screw minute nut in place can mean that if the product has the second hand, this minute nut or brass cap needn't. Please note that our package does not include the minute nut. Features: Brand: Rhythm  Name: Quartz clock movements  Movement case material: Plastic  Parts within movement material: Copper wire and Plastic  Clock


Dhorcas (#04) 3/4'' Threaded Motor and White 5'' Hands and Hanger, Quartz Clock Movement Kit for Replacement
Dhorcas (#04) 3/4" Threaded Motor and White 5" Hands and Hanger, Quartz Clock Movement Kit for Replacement
By Dhorcas Designs
In Stock
$11.00

mpn: 6262, ean: 0759883837974,

4.6 out of 5 stars with 77 reviews
One Quartz Clock Movement/Motor kit #6262 with a total shaft length of 1 1/16'', and a threaded shaft of 3/4'' for 11/16'' thick dials. This kit comes complete with white metal minute, hour and second hand, with a washer and a nut.FAST SHIPPING... get it in 2-4 business day. Total shaft length: 1 1/16in.. Motor size: 2 2/16'' x 2 2/16'' x 5/8''. Threaded shaft length: 3/4in. For 11/16'' thick dials. Quiet, smooth sweep second hand motion. Precise degree is high.


Quartex Standard Push-On Movement with Hex Nut - Long Shaft
Quartex Standard Push-On Movement with Hex Nut - Long Shaft
By Quartex
In Stock
$10.99
$6.99
You Save: 36%

mpn: 10052,

4.1 out of 5 stars with 120 reviews
This Standard Push-On Movement uses the included hex nut to secure the dial to the movement. Push-on hands make this movement a snap to finish. Keep accurate time, and easy to use to replace your existing clock motors. Includes free pair of hands.2 Year Warranty. 1/4'' Maximum Dial Thickness; 3/4'' Total Hand Shaft Length. 5/16'' Shaft Diameter. Case Size: 2 3/16'' Square x 11/16''D. Hour and minute hands included.


Clock Mechanism Parts - Classic Silver Triangle Hands Quartz Clock Movement Mechanism Parts Repair Replacing Essential Tools Set
Clock Mechanism Parts - Classic Silver Triangle Hands Quartz Clock Movement Mechanism Parts Repair Replacing Essential Tools Set
By SupertownAZ
In Stock
$13.99

mpn: 0733153294254, ean: 0733153294254,

4.6 out of 5 stars with 80 reviews
.


12888SH 24 Hour Movement Screw In Type Clock Accessory Quartz Plastic Leap Movement With 95# Black Clock Hand Clock Kits (6mm screw length)
By Young Town 24 hour movement
In Stock
$10.90

mpn: 12888 24 hour+95, ean: 7907613245954,

4.7 out of 5 stars with 106 reviews
Brand: Young Town Model Number:12888SH Name:24 Hour Quartz clock movements Size:Case 56*56mm,Total axis length 13.5mm, Screw axis length 6mm Movement case material: Plastic Parts within movement material: Copper wire and Plastic Clock hand Material: Aluminum Dial Fixation: Centre Screw Second hand motion: Leap Accuracy Within ±30seconds deviation each month (in normal temperature) Battery: one 1.5V Carbon-zinc batteries only,not included. Please DO NOT USE Alkaline battery,Rechargeable


New Replacement Non Ticking Quartz (Sweep) Clock Movement Mechanism Motor - DIY - Fittings (Extra Long - Gold Thread 20mm - Total length 27mm)
New Replacement Non Ticking Quartz (Sweep) Clock Movement Mechanism Motor - DIY - Fittings (Extra Long - Gold Thread 20mm - Total length 27mm)
By Dans Clock Shop
In Stock
$11.29

mpn: 604428252210, ean: 0604428252197,

4.9 out of 5 stars with 37 reviews
New Replacement Non Ticking Quartz (Sweep) Clock Movement Mechanism Motor - DIY - FittingsAvailable in 5 spindle sizes - short, medium, long, Extra long & supersize. Movement dimensions - Height 70mm ( 55mm with hanger removed ) - Width 55mm - Depth 16mm. Please note that movements are compatible with quartz press fit hands with a shaft size for the hour hand 5.5mm and minute hand 3.6mm ( NOT INCLUDED ). Hanger can easily be removed with a small saw, ROHS approved, Complete with all fittings.


Mudder Long Spindle Clock Movement, 4/ 5 Inch Maximum Dial Thickness, 1-1/ 5 Inch Total Shaft Length
Mudder Long Spindle Clock Movement, 4/ 5 Inch Maximum Dial Thickness, 1-1/ 5 Inch Total Shaft Length
By Mudder
In Stock
$16.49
$11.49
You Save: 30%

mpn: MUDDER-Clock-57, ean: 0710560330720,

4.5 out of 5 stars with 93 reviews
Mudder long spindle clock movement, 4/ 5 inch maximum dial thickness, 1-1/ 5 inch total shaft length Size: Total shaft length is 31 mm (1-1/ 5 inch); Thread length is 24.6 mm (24/ 25 inch); Total hour hand length is approx. 144 mm (5.7 inches); Total minute hand length is approx. 185 mm (7.3 inches); Second caps is approx. 7 mm (0.3 inches). Long spindle: Long spindle quartz clock replacement movement parts with metal hook, convenient to install and use. Good for making a clock: The quartz


FunnyToday365 Shinfuku Wall Clock Mechanism With Hands Silent Plastic Movement Diy Clock Accessory Kits Sweep Quartz Movement
FunnyToday365 Shinfuku Wall Clock Mechanism With Hands Silent Plastic Movement Diy Clock Accessory Kits Sweep Quartz Movement
By FunnyToday365
In Stock
$11.99

mpn: Funny-H-M-K0618, ean: 6927889416606,

4.5 out of 5 stars with 90 reviews
Name: Quartz clock movements Size:Case 56*56mm,Total axis length 13.2mm, Screw axis length 6mm Movement case material: Plastic Parts within movement material: Copper wire and Plastic Clock hand Material: Aluminum Dial Fixation: Centre Screw Second hand motion: Sweep Accuracy Within ¡À30seconds deviation each month (in normal temperature) Battery: one 1.5V Carbon-zinc batteries only,not included. Please DO NOT USE Alkaline battery,Rechargeable batteries,they will damage the


Hicarer High Torque Quartz Clock Movement Clock Replacement Mechanism 12 Inch Long Spade Hands DIY Clock
Hicarer High Torque Quartz Clock Movement Clock Replacement Mechanism 12 Inch Long Spade Hands DIY Clock
By Hicarer
In Stock
$16.99
$13.49
You Save: 21%

mpn: Hicarer-Clock Movement-01, ean: 0652508261713,

4.2 out of 5 stars with 30 reviews
High torque quartz clock movement clock replacement kits with 12 inch long spade hands for DIY clock Features: Total shaft length is 20 mm and its thread length is 15.4 mm, applicable for 9 - 13 mm (9/ 25 - 1/ 2 inches) thickness clock panel. Application: Repair, replace or make a clock, suitable for cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, etc. Easy and simple to design: The component parts are easy to assemble together and the black metal hands may be


Hicarer High Torque Long Shaft Clock Movement Mechanism with 12 Inch Long Spade Hands (Black)
Hicarer High Torque Long Shaft Clock Movement Mechanism with 12 Inch Long Spade Hands (Black)
By Hicarer
In Stock
$14.59

mpn: Hicarer-Clock Movement Mechanism-01, ean: 0652508260419,

4.9 out of 5 stars with 122 reviews
High torque long shaft clock movement mechanism with 12 inch long spade hands Kindly reminder: There is a printing mistake in the instruction; The 8th instruction is wrong; Our package not includes screw minute nut; We are sorry for any convenience being brought to you. Features: Total shaft length is 28 mm and its thread length is 15.4 mm, applicable for 9 - 13 mm (9/ 25 - 1/ 2 inches) thickness clock panel. Application: You can use the clock movement to repair, replace or make a clock,


Quartz Clock Pendulum Movement 5/8'' Shaft W/hands
Quartz Clock Pendulum Movement 5/8" Shaft W/hands
By A-n-b collectibles
In Stock
$15.99

mpn: unknown, ean: 1699899000421,

4.5 out of 5 stars with 138 reviews
Requires AA battery - not included. Minute hand length equals 4'' and fits a dial width of approx 8''Shaft length 5/8''. Size 3 3/8'' H x 2 1/8'' W x 11/16'' D. Dial Thickness upto 1/4''. Includes Pendulum and Hands (hands not pictured). Made in USA.


8-Day Wall Clock Movement Mechanism Pendulum Drop Parts
8-Day Wall Clock Movement Mechanism Pendulum Drop Parts
By FindingKing
In Stock
$65.99

mpn: 58094396,

4.5 out of 5 stars with 25 reviews
8 Day Clock Movement For Clock Repair This is a new 8 day clock movement Great for clock repair Includes a key, a pair of clock hands and a pendulum rod The length from the center shaft movement is 2 7/8'' (73 mm) deep The pendulum from the center of the shaft to the tip measures approximately 13'' long This movement measures approximately 5'' x 4 1/2'' x 2 7/8'' x 3 3/4'' (127 x 114.3 x 95 mm) Newer versions of the item shown may be shipped, as a result, there may be a slight variation in


Mudder High Torque Clock Replacement Movement, 1/2 Inch Maximum Dial Thickness, 9/10 Inch Total Shaft Length (Shaft Length 9/10 Inch/ 23 mm, Black)
Mudder High Torque Clock Replacement Movement, 1/2 Inch Maximum Dial Thickness, 9/10 Inch Total Shaft Length (Shaft Length 9/10 Inch/ 23 mm, Black)
By Mudder
In Stock
$10.99

mpn: Mudder-Clock-01, ean: 0710560330874,

4.6 out of 5 stars with 45 reviews
Mudder High Torque Clock Replacement Movement, 1/ 2 Inch Maximum Dial Thickness, 9/ 10 Inch Total Shaft Length Features: Total shaft length is 23 mm and its thread length is 15.4 mm, applicable for 9 - 13 mm (9/ 25 - 1/ 2 inches) thickness clock panel. Application: Use to repair, replace or make a clock, suitable for cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, etc. Easy and simple design: The component parts easy to assemble together and the black metal


Hicarer 2-1/8 inch (55 mm) Quartz Clock Insert, Zinc-Alloy Metal Case, Arabic Numeral, White Face (Silver)
Hicarer 2-1/8 inch (55 mm) Quartz Clock Insert, Zinc-Alloy Metal Case, Arabic Numeral, White Face (Silver)
By Hicarer
In Stock
$16.99
$10.99
You Save: 35%

mpn: Hicarer-Clock Insert-01, ean: 0652508260037,

4.4 out of 5 stars with 105 reviews
2-1/8 Inch (55 mm) quartz clock insert, silver bezel, zinc-alloy metal case, Arabic numeral, white face Appearance: Clock insert is designed with Japanese PC 21 clock movement, rubber ring mounting system, Arabic numerals on white face, clear glass lens, and silver colored bezel trim; It fits for many types of glass and crystal clocks. Simple quartz clock: The round clock insert is in silver with simple and delicate design; It features a Japanese PC 21 battery with a 2-year lifetime, good for


Dhorcas (#02) 3/4'' Threaded Motor and Gold 6'' Hands, Quartz Clock Movement Kit for Replacement
Dhorcas (#02) 3/4" Threaded Motor and Gold 6" Hands, Quartz Clock Movement Kit for Replacement
By Dhorcas Designs
In Stock
$10.20

mpn: 6262, ean: 0759883837721,

4.6 out of 5 stars with 89 reviews
One Quartz Clock Movement/Motor kit #6262 with a total shaft length of 1 1/16'', and a threaded shaft of 3/4'' for 11/16'' thick dials. This kit comes complete with a gold metal minute, hour and second hand, with a washer and a nut.FAST SHIPPING... get it in 2-4 business day. Total shaft length: 1 1/16in.. Motor size: 2 2/16'' x 2 2/16'' x 5/8''. Threaded shaft length: 3/4in. For 11/16'' thick dials. Quiet, smooth sweep second hand motion. Precise degree is high.


Hicarer 31 mm High Torque Long Shaft Clock Movement with 2 Spade Hands to Fit Dials up to 51.4 cm/ 20 Inches in Diameter
Hicarer 31 mm High Torque Long Shaft Clock Movement with 2 Spade Hands to Fit Dials up to 51.4 cm/ 20 Inches in Diameter
By Hicarer
In Stock
$14.99
$10.99
You Save: 27%

mpn: Hicarer-Clock Movement-01, ean: 0652508260143,

4.1 out of 5 stars with 83 reviews
31 mm High torque long shaft clock movement with 2 spade hands to fit dials up to 51.4 cm/ 20 inches in diameter Wide usages: These clock movements function as useful tools to DIY crafts, and they are suitable for repairing, replacing an old damaged clock or making a new one; Moreover, they are applicable to cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock and more. Specification: Material: plastic and aluminum Power: 1.5 V AA 1 x battery (not included)


Hicarer High Torque Quartz Clock Movement Replacement Parts with 208 mm/ 8.2 inches Long Spade Hands and Hanger (20 mm (4/5 inches))
Hicarer High Torque Quartz Clock Movement Replacement Parts with 208 mm/ 8.2 inches Long Spade Hands and Hanger (20 mm (4/5 inches))
By Hicarer
In Stock
$13.99
$10.99
You Save: 21%

mpn: Hicarer-High Torque Quartz-01, ean: 0652508259529,

4.6 out of 5 stars with 59 reviews
High torque quartz clock movement replacement parts with 208 mm/ 8.2 inches long hands and hanger Wide application: These clock movements are function as good tools for DIY design, have the clock designed and made by yourself; Suit for repairing, replacing the damaged clock or making a new one; Applicable to cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock and more. Specification: Material: plastic and aluminum Power: 1 x 1.5 V AA battery (not included) Case size:



Viewing Page 3 of 4

View more products in Clock Hardware.
Feel free to Browse Our Catalog.

Scroll To Top


Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - sunnydoors.com. All Rights Reserved.