Expansion Shield Anchors - Extreame Savings! Save up to 50%


Extreame Savings! Up to 50% off on Expansion Shield Anchors at Sunny Doors. Top brands include CONFAST, Wej-It, Unknown, eDealMax, Hard-to-Find Fastener, & Powers Fastening Innovations. Hurry! Limited time offers. Offers valid only while supplies last.



CONFAST 5/16" (Inside/Screw 5/16" diameter) Double Expansion Anchor (50 per box)
By CONFAST
In Stock
$25.19

mpn: DE516,

4.3 out of 5 stars with 123 reviews
ApplicationsThe anchor is made from Zamac Alloy. This anchor is designed for use in Concrete, Block, and Brick.EnvironmentThe anchor is designed for use in a Moist environment.Hole Diameter/Bit DiameterThe anchor requires a 5/8'' hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Minimum EmbedmentThe minimum anchor embedment into the concrete is 1-1/2''. Therefore, the


Wej-It DES14 Expansion Shield Anchor, Zamac Alloy, Meets GSA FFS-325 Group II Type 2 Class 2 Style 2, 1/2" Diameter, 1-5/16" Length, 1/4"-20 Threads (Pack Of 100)
By Wej-It
In Stock
$36.49

mpn: DES14, ean: 0789957348273,

4.5 out of 5 stars with 52 reviews
The Wej-It DES14 expansion shield anchor is made of rust-resistant zamac alloy, provides a secure hold in most materials including solid masonry and uncracked concrete even when exposed to side pressure and vibration, and meets Federal Specification GSA FFS-325 Group II Type 2 Class 2 Style 2. The double expansion provides higher holding strength than single-point expansion anchors. The body expands throughout its length, eliminating the high stress points that occur with single-point expansion


Expansion Anchor, 5/8x1 3/4 In, PK25
By Unknown
In Stock
$71.67

mpn: NA, ean: 7440017524596,

4.2 out of 5 stars with 38 reviews
Expansion Anchor, Lag Screw Expansion Anchor, Zinc Alloy, Anchor Dia. 5/8 In., Anchor Internal Thread Dia. 3/8 In., Anchor Length 1-3/4 In., Screw Size 3/8 In., Anchor Drill Size 5/8 In., Min. Embedment 1-3/4 In., Ultimate Tension in 3000 PSI Concrete (Lb.) 3300, Use With Lag Screws, Application Concrete and Block, Meets/Exceeds GSA SPEC FF-S-325C,GRP II, TYPE 1, CLASS 2, Package Quantity 25Specitication: Ultimate Tension in 3000 PSI Concrete (Lb.): 3300Item: Expansion AnchorMin. Embedment:


Wej-It MS56 Expansion Shield Anchor, Zamac Alloy, Meets A-A 1922A Type 1 and FFS-325C Group 1 Type 1 Class 1, 1" Length, 5/16"-18 Threads (Pack Of 50)
By Wej-It
In Stock
$23.53
$19.99
You Save: 15%

mpn: MS56,

4.1 out of 5 stars with 143 reviews
The Wej-It MS56 expansion shield anchor is made of antimonial lead and zamac alloy, provides a secure hold in most materials including solid masonry and uncracked concrete, and meets Federal Specifications A-A 1922A Type 1 and FFS-325C Group 1, Type 1, Class 1. It can be used to anchor within uneven holes and soft materials, and its antimonial lead sleeve and zamac alloy cone resist rust for extended use.Also known as a machine screw anchor, the expansion shield anchor has a sleeve that expands


Voiture en Acier inoxydable eDealMax Réparation Gecko Extension Boulon Vis M8x60mm 6pcs
By eDealMax
In Stock
$10.01

mpn: FR_DLM-B01FYBXRYA, ean: 6093741469940,

4.6 out of 5 stars with 142 reviews
Fait de 304 matériau en acier inoxydable dans le ton argent, fil M8, 60mm totale vis d'expansion de la force length.High d'expansion gecko de réparation de voiture, de bonne qualité pour l'utilisation plus.Nom du produit: réparation voiture boulon d'expansion; Matériel: Acier inoxydable 304. Poids: 147g; Contenu du coffret: 6 x Boulon d'extension de réparation de voitures. Taille du filetage: M8 x 20 mm / 0,31' x 0,8' (D * L); Couleur principale: ton argent. Longueur totale: 60 mm / 2,4'


eDealMax 76mm Long M8 filetage femelle à ressort mur Creux d'ancrage Wing Nuts 10 Pcs
By eDealMax
In Stock
$11.84

mpn: FR_DLM-B01IVVVMWY, ean: 6093741473060,

4.8 out of 5 stars with 23 reviews
M8 ressort aile basculant nut.An toutes les fixations de la cavité d'affectation de lumière métallique, plusieurs ailes durable.The de la bascule répartir la charge sur une plus grande zone avec auto-extensible machanism, fixe plus firmly.Can installé sur la paroi de la cavité de plaque de plâtre pour maintenir une étagère, rideau tige, portemanteau, lamps.Screws ne sont pas inclus ici Méthode installé:Nom du produit: Basculer Wing Nut; Matière: Métal. Poids: 190g; Contenu du


Hard-to-Find Fastener 014973269647 1/2-Inch Short Lag Expansion Shields, 25-Piece
By Hard-to-Find Fastener
In Stock
$31.18
$27.75
You Save: 11%

mpn: ESAS-109-25, ean: 0738287041781,

4.9 out of 5 stars with 111 reviews
We stock a wide variety of fasteners ideal for many applications arround the home, farm, business, automotives, and in industry. Most of our fasteners have a light zinc plating over steel giving a more rust resistant finsh. We also sell coated and stainless products for additional rust resistance. We stock many grades of fasteners ranging from low carbon steel on up to hardened, heat treated steel. Not all fasteners are applicable for all applications so be certain to test thouroughly and get


Expansion Anchor, 5/8x1 1/2 In, PK25
By Unknown
In Stock
$45.54

mpn: NA, ean: 7440017524572,

4.9 out of 5 stars with 118 reviews
Expansion Anchor, Machine Screw Expansion Anchor, Zinc Alloy, Anchor Dia. 5/8 In., Anchor Internal Thread Dia. 5/16 In., Anchor Length 1-1/2 In., Screw Size 5/16-18, Internal Thread Size 5/16-18, Anchor Drill Size 5/8 In., Min. Embedment 1-1/2 In., Ultimate Shear in 3000 PSI Concrete (Lb.) 2400, Ultimate Tension in 3000 PSI Concrete (Lb.) 2620, Use With Machine Screws, Application Concrete and Block, Package Quantity 25Specitication: Ultimate Tension in 3000 PSI Concrete (Lb.): 2620Item:


Expansion Anchor, 7/8x2 3/16 In, PK5
By Unknown
In Stock
$54.18

mpn: NA, ean: 7440017624685,

4.1 out of 5 stars with 78 reviews
Expansion Anchor, Machine Screw Expansion Anchor, Zinc Alloy, Anchor Dia. 7/8 In., Anchor Internal Thread Dia. 1/2 In., Anchor Length 2-3/16 In., Screw Size 1/2-13, Internal Thread Size 1/2-13, Anchor Drill Size 7/8 In., Min. Embedment 2-3/16 In., Ultimate Shear in 3000 PSI Concrete (Lb.) 6500, Ultimate Tension in 3000 PSI Concrete (Lb.) 7550, Use With Machine Screws, Application Concrete and Block, Package Quantity 5Specitication: Ultimate Tension in 3000 PSI Concrete (Lb.): 7550Item:


Hard-to-Find Fastener 014973269586 Lag Expansion Shields, 3/8 Short, Piece-6
By Hard-to-Find Fastener
In Stock
$14.25
$7.18
You Save: 50%

mpn: ESAS-097-6, ean: 0014973269586,

4.1 out of 5 stars with 127 reviews
We stock a wide variety of fasteners ideal for many applications around the home, farm, business, automotive, and in industry. Most of our fasteners have a light zinc plating over steel giving a more rust resistant finish. We also sell coated and stainless products for additional rust resistance. We stock many grades of fasteners ranging from low carbon steel on up to hardened, heat treated steel. Not all fasteners are applicable for all applications so be certain to test thoroughly and get the


eDealMax M12x100mm Wedge Anchor Extension de réparation de voitures Bolt Bronze 4pcs Tone
By eDealMax
In Stock
$13.32

mpn: FR_DLM-B01FXMAN06, ean: 6093741469506,

4.5 out of 5 stars with 98 reviews
Fait de matériau métallique dans le ton de bronze, filetage M12, 100mm vis d'extension force long.High réparation automobile boulon d'expansion de gecko, de bonne qualité pour l'utilisation plus.Nom du produit: réparation voiture boulon d'expansion; Matière: Métal, plaqué zinc jaune. Poids: 360g; Contenu du coffret: 4pcs x extension de réparation de voitures Bolt. Taille du filetage: M12 x 55mm / 0,47' x 2,2' (D * L); Couleur principale: Tone Bronze. Longueur totale: 100mm / 4' ;


Expansion Anchor, 1/2x1 3/4 In, PK25
By Unknown
In Stock
$59.07

mpn: NA, ean: 7440017624630,

4.3 out of 5 stars with 13 reviews
Expansion Anchor, Lag Screw Expansion Anchor, Zinc Alloy, Anchor Dia. 1/2 In., Anchor Internal Thread Dia. 5/16 In., Anchor Length 1-3/4 In., Screw Size 5/16 In., Anchor Drill Size 1/2 In., Min. Embedment 1-3/4 In., Ultimate Tension in 3000 PSI Concrete (Lb.) 2500, Use With Lag Screws, Application Concrete and Block, Meets/Exceeds GSA SPEC FF-S-325C,GRP II, TYPE 1, CLASS 1, Package Quantity 25Specitication: Ultimate Tension in 3000 PSI Concrete (Lb.): 2500Item: Expansion AnchorMin. Embedment:


CONFAST 1/2" Lag Shield Anchor Short (25 per box)
By CONFAST
In Stock
$21.14

mpn: LSS12,

4.2 out of 5 stars with 10 reviews
ApplicationsThe anchor is made from Zamac Alloy. This anchor is designed for use in Concrete, Block, and Brick.EnvironmentThe anchor is designed for use in a Wet environment.Hole Diameter/Bit DiameterThe anchor requires a 3/4'' hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Minimum EmbedmentThe minimum anchor embedment into the concrete is 2''. Therefore, the anchor


CONFAST 1/2" Lag Shield Anchor Long (25 per box)
By CONFAST
In Stock
$20.19

mpn: LSL12,

4.6 out of 5 stars with 74 reviews
ApplicationsThe anchor is made from Zamac Alloy. This anchor is designed for use in Concrete, Block, and Brick.EnvironmentThe anchor is designed for use in a Wet environment.Hole Diameter/Bit DiameterThe anchor requires a 3/4'' hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Minimum EmbedmentThe minimum anchor embedment into the concrete is 3-1/2''. Therefore, the anchor


Voiture en Acier inoxydable eDealMax Réparation Gecko Extension Boulon Vis M12x150mm 2pcs
By eDealMax
In Stock
$13.34

mpn: FR_DLM-B01FYBYNN4, ean: 6093741470175,

4.8 out of 5 stars with 136 reviews
Fait de 304 matériau en acier inoxydable dans le ton argent, fil M12, 150mm boulon totale vis d'expansion de la force length.High d'expansion gecko de réparation de voiture, de bonne qualité pour l'utilisation plus.Nom du produit: réparation voiture boulon d'expansion; Matériel: Acier inoxydable 304. Poids: 256 g; Contenu du coffret: 2 x Boulon d'extension de réparation de voitures. Taille du filetage: M12 x 70mm / 0,47' x 2,8' (D * L); Couleur principale: ton argent. Longueur: 150 mm /


eDealMax grève Marteau clous Gecko Extension boulons Vis M16x120mm 2pcs
By eDealMax
In Stock
$14.45

mpn: FR_DLM-B01FYDBL0K, ean: 6093741470359,

4.4 out of 5 stars with 72 reviews
Fait de matériau métallique, plated.A de zinc jaune forte ancre, avec une fonction fiable d'expansion, resistance.Easy la corrosion et rapide à install.It peut être utilisé pour fixer les composants métalliques, support et clôture de la route, ainsi que des signes et modèle de fixation.Nom du produit: boulon d'expansion; Matière: Métal, plaqué zinc jaune. Poids: 428g; Contenu du coffret: 2 x boulon d'expansion. Couleur principale: Tone Bronze; Taille du boulon (D * L): 16 x 120 mm /


CONFAST 5/8" Lag Shield Anchor Long (25 per box)
By CONFAST
In Stock
$33.69

mpn: LSL58,

4.4 out of 5 stars with 44 reviews
ApplicationsThe anchor is made from Zamac Alloy. This anchor is designed for use in Concrete, Block, and Brick.EnvironmentThe anchor is designed for use in a Wet environment.Hole Diameter/Bit DiameterThe anchor requires a 7/8'' hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Minimum EmbedmentThe minimum anchor embedment into the concrete is 3-1/2''. Therefore, the anchor


eDealMax boulon d'expansion Ancres Gecko Car Réparation boulons M12x80mm 4pcs
By eDealMax
In Stock
$11.81

mpn: FR_DLM-B01FXMB0V2, ean: 6093741469766,

4.4 out of 5 stars with 105 reviews
Fait de matériau métallique dans le ton de bronze, filetage M12, boulon d'expansion 80mm vis d'expansion de la force long.High de réparation automobile gecko, de bonne qualité pour l'utilisation plus.Nom du produit: réparation voiture boulon d'expansion; Matière: Métal, plaqué zinc jaune. Poids: 305 g; Contenu du coffret: 4 x Boulon d'extension de réparation de voitures. Taille du filetage: M12 x 33mm / 0,47' x 1.3' (D * L); Couleur principale: Tone Bronze. Longueur: 80 mm / 3.1' ;


Powers Fastening Innovations 09525 Dual Expansion Machine Bolt Anchor 1/2-Inch, 25 Per Box
By Powers Fastening Innovations
In Stock
$32.16
$30.42
You Save: 5%

mpn: 09525, ean: 0075352095257,

4.8 out of 5 stars with 91 reviews
Powers Fasteners is the leading supplier of concrete and masonry anchors in North America and has been a leader in the fastening industry since 1921. Powers is an ISO-9001 international anchoring products company with extensive expertise in the following groups: Mechanical Anchors, Adhesive, Light Duty, Roofing and Carbide Drill Bits.Dual expansion machine bolt anchor particularly suited for base materials of questionable strength. Can be used in solid concrete and some block, brick and stone


eDealMax boulon d'expansion Ancres Gecko Car Réparation boulons M10x150mm 3pcs
By eDealMax
In Stock
$10.19

mpn: FR_DLM-B01FYBXYT8, ean: 6093741470021,

4.6 out of 5 stars with 92 reviews
Fait de matériau métallique dans le ton de bronze, fil M10, 150mm vis d'extension force long.High réparation automobile boulon d'expansion de gecko, de bonne qualité pour l'utilisation plus.Nom du produit: réparation voiture boulon d'expansion; Matière: Métal, plaqué zinc jaune. Poids: 251g; Contenu du coffret: 3 x Boulon d'extension de réparation de voitures. Taille du filetage: M10 x 100 mm / 0,4' x 4' (D * L); Couleur principale: Tone Bronze. Longueur: 150 mm / 5,9' ; Rondelle



Viewing Page 1 of 6

View more products in Anchors.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - sunnydoors.com. All Rights Reserved.