Square Head Bolts - Page 2


Save on Square Head Bolts at Sunny Doors, Page 2. Top brands include Newport Fasteners, ASMC Industrial, GRAINGER APPROVED, KREG, Kreg, & Jet Fitting & Supply Corp. Hurry! Limited time offers. Offers valid only while supplies last.



Square Head Set Screw, Cup Point, 1/4-20 x 1 1/4", Alloy Steel Case Hardened, Black Oxide, Full Thread (Quantity: 100) Coarse Thread, 1/4 inch Square Head Bolts, Length: 1 1/4 inch
By Newport Fasteners
In Stock
$75.99

mpn: 724739, ean: 8945135957534,

4.1 out of 5 stars with 148 reviews
Has a Sharp conical shaped point at the bottom endThe cup point Square Head Set screws is the most common point. Designed for fast, permanent and semi-permanent location of parts on shafts. Black Oxide is not a protective finish and will rust if exposed to moisture. Stainless Steel material is recommended for environments with moisture.


5/16-18 x 3/4" Square Head Machine Bolts/Steel/Plain (Carton: 800 pcs)
By Newport Fasteners
In Stock
$99.99

mpn: 144780, ean: 8945136194761,

4.7 out of 5 stars with 97 reviews
Offers Greater bearing surface for wrenching than hex head bolts. Externally Threaded mechanical device with a trimmed square shaped external wrenching head.Square Machine Bolts. Manufactured to ASME B18.2.1 specifications. Tensile Strength - 60,000 psi. min.. Low Carbon Steel / Plain Finish.


Square Head Set Screw, Dog - Half, 3/8-16 x 3 1/2", Alloy Steel Case Hardened, Black Oxide, Full Thread (Quantity: 50) Coarse Thread, 3/8 inch Square Head Bolts, Length: 3 1/2 inch
By Newport Fasteners
In Stock
$98.99

mpn: 442749, ean: 8945135954762,

4.7 out of 5 stars with 49 reviews
Dog Point set screws are considered headless screws that that are threaded the entire length. They have an internal hexagonal drive at one end and a full or half-dog point at the other. One of the main advantages dog point set screws have over cup point set screws is they won't cut into the shaft and damage it or the component.Thread: Coarse / Full Thread / Case Hardened / Black Oxide. Thread Diameter-Pitch: 3/8-16, Length: 3 1/2 inch. Coarse Thread. Black Oxide is not a protective finish


Square Head Set Screw, Dog - Half, 3/8-16 x 1, Alloy Steel Case Hardened, Black Oxide, Full Thread (Quantity: 100) Coarse Thread, 3/8 inch Square Head Bolts, Length: 1 inch
By Newport Fasteners
In Stock
$74.99

mpn: 208389, ean: 8945135954687,

4.1 out of 5 stars with 40 reviews
Dog Point set screws are considered headless screws that that are threaded the entire length. They have an internal hexagonal drive at one end and a full or half-dog point at the other. One of the main advantages dog point set screws have over cup point set screws is they won't cut into the shaft and damage it or the component.Thread: Coarse / Full Thread / Case Hardened / Black Oxide. Thread Diameter-Pitch: 3/8-16, Length: 1 inch. Coarse Thread. Black Oxide is not a protective finish and


Square Head Set Screw, Dog - Half, 1/4-20 x 1 1/2", Alloy Steel Case Hardened, Black Oxide, Full Thread (Quantity: 100) Coarse Thread, 1/4 inch Square Head Bolts, Length: 1 1/2 inch
By Newport Fasteners
In Stock
$63.99

mpn: 643405, ean: 8945135954472,

4.0 out of 5 stars with 41 reviews
Dog Point set screws are considered headless screws that that are threaded the entire length. They have an internal hexagonal drive at one end and a full or half-dog point at the other. One of the main advantages dog point set screws have over cup point set screws is they won't cut into the shaft and damage it or the component.Thread: Coarse / Full Thread / Case Hardened / Black Oxide. Thread Diameter-Pitch: 1/4-20, Length: 1 1/2 inch. Coarse Thread. Black Oxide is not a protective finish


Square Head Set Screw, Dog - Half, 3/8-16 x 1/2", Alloy Steel Case Hardened, Black Oxide, Full Thread (Quantity: 100) Coarse Thread, 3/8 inch Square Head Bolts, Length: 1/2 inch
By Newport Fasteners
In Stock
$64.99

mpn: 647664, ean: 8945135954649,

4.2 out of 5 stars with 50 reviews
Dog Point set screws are considered headless screws that that are threaded the entire length. They have an internal hexagonal drive at one end and a full or half-dog point at the other. One of the main advantages dog point set screws have over cup point set screws is they won't cut into the shaft and damage it or the component.Thread: Coarse / Full Thread / Case Hardened / Black Oxide. Thread Diameter-Pitch: 3/8-16, Length: 1/2 inch. Coarse Thread. Black Oxide is not a protective finish and


5/16"-18 x 1 1/2" A307 Grade A Square Head Machine Bolt Low Carbon Steel Hot Dip Galvanized Pk 100
By ASMC Industrial
In Stock
$31.30

mpn: 0000-114913,

4.2 out of 5 stars with 63 reviews
ASMC Industrial offers a comprehensive selection industrial, automotive, and construction fasteners. Our parts are high-quality, at low prices, shipped from stock. We also feature a full line of USA-made fasteners, including Grade 5 and Grade 8 hex cap screws, sockets, stainless products, nuts, and washers.FASTENER SPECIFICATIONSPart #: 0000-114913Part Name: 5/16''-18 x 1 1/2'' Square Head Machine BoltFastener Type: Square Head Machine BoltSize Description: 5/16''-18 x 1 1/2''Diameter/Nominal


Square Head Set Screw, Flat Point, 3/8-16 x 1 1/2", Alloy Steel Case Hardened, Black Oxide, Full Thread (Quantity: 100) Coarse Thread, 3/8 inch Square Head Bolts, Length: 1 1/2 inch
By Newport Fasteners
In Stock
$98.99

mpn: 507779, ean: 8945135957220,

4.8 out of 5 stars with 114 reviews
Flat Point Hexagon Socket Set Screws are headless screws that are threaded the entire length. they have an internal hexagonal drive at one end and a flat point at the other. One of the main advantages flat point set screws have over cup point set screws is the ground flat shaft has better contact. Flat Point Set Screws are designed frequent resetting or relocating on hard steel shafts and where minimal damage to shafts is necessaryThread: Coarse / Full Thread / Case Hardened / Black Oxide.


Square Head Set Screw, Oval Point, 5/8-11 x 3/4", Alloy Steel Case Hardened, Black Oxide, Full Thread (Quantity: 20) Coarse Thread, 5/8 inch Square Head Bolts, Length: 3/4 inch
By Newport Fasteners
In Stock
$95.99

mpn: 590323, ean: 8945135958272,

4.1 out of 5 stars with 36 reviews
Oval point socket set screws are headless screws with an internal hexagonal drive on one end and an Oval shaped point on the other end. Oval point socket set screws are often used in applications where frequent adjustments are needed and minimal deforming of the part is required.  It may be used in applications where the point contacts the mating part at an angle.Thread-Pitch: 5/8-11. Length: 3/4 inch. Black Oxide is not a protective finish and will rust if exposed to moisture. Stainless Steel


Square Head Set Screw, Dog - Half, 1/2-13 x 4, Alloy Steel Case Hardened, Black Oxide, Full Thread (Quantity: 25) Coarse Thread, 1/2 inch Square Head Bolts, Length: 4 inch
By Newport Fasteners
In Stock
$78.99

mpn: 830511, ean: 8945135954908,

4.5 out of 5 stars with 41 reviews
Dog Point set screws are considered headless screws that that are threaded the entire length. They have an internal hexagonal drive at one end and a full or half-dog point at the other. One of the main advantages dog point set screws have over cup point set screws is they won't cut into the shaft and damage it or the component.Thread: Coarse / Full Thread / Case Hardened / Black Oxide. Thread Diameter-Pitch: 1/2-13, Length: 4 inch. Coarse Thread. Black Oxide is not a protective finish and


Steel Square Head Set Screws; Number of Pieces: 60
By GRAINGER APPROVED
In Stock
$75.88

mpn: NA, ean: 7438050538519,

4.2 out of 5 stars with 95 reviews
A set screw can be used to prevent relational motion of permanently located parts. It is typically used in electronics and for applications where space is a key concern. Key characteristics of a set screw include a point designed to bear against a mating part at the opposite end, and threads extending the entire length of the shaft.Specifications:Item: Square Head Set ScrewsType: Square Head, Cup PointMaterial: SteelNumber of Pieces: 60Number of Sizes: 6Meets/Exceeds: ASME/ANSIIncludes: (20)


Square Head Set Screw, Cup Point, 1/4-20 x 3/8", Alloy Steel Case Hardened, Black Oxide, Full Thread (Quantity: 100) Coarse Thread, 1/4 inch Square Head Bolts, Length: 3/8 inch
By Newport Fasteners
In Stock
$59.99

mpn: 941322, ean: 8945135957473,

4.5 out of 5 stars with 86 reviews
Has a Sharp conical shaped point at the bottom endDesigned for Permanent Setting on soft or hardened shafts. Deep penetration gives this style of screw the highest torsional and axial holding power. Can be used as a hangar or pivot. For shafts of Rockwell hardness C15 or more, spot point half its depth. Black Oxide is not a protective finish and will rust if exposed to moisture. Stainless Steel material is recommended for environments with moisture.


Square Head Set Screw, Dog - Half, 3/8-16 x 1 1/4", Alloy Steel Case Hardened, Black Oxide, Full Thread (Quantity: 100) Coarse Thread, 3/8 inch Square Head Bolts, Length: 1 1/4 inch
By Newport Fasteners
In Stock
$82.99

mpn: 539739, ean: 8945135954694,

4.3 out of 5 stars with 56 reviews
Dog Point set screws are considered headless screws that that are threaded the entire length. They have an internal hexagonal drive at one end and a full or half-dog point at the other. One of the main advantages dog point set screws have over cup point set screws is they won't cut into the shaft and damage it or the component.Thread: Coarse / Full Thread / Case Hardened / Black Oxide. Thread Diameter-Pitch: 3/8-16, Length: 1 1/4 inch. Coarse Thread. Black Oxide is not a protective finish


5/16"-18 x 1 (FT) Coarse Thread Square Head Set Screw Cup Point Low Carbon Steel Case Hardened Plain Finish Pk 25
By ASMC Industrial
In Stock
$10.95

mpn: 0000-112238,

4.5 out of 5 stars with 74 reviews
ASMC Industrial offers a comprehensive selection industrial, automotive, and construction fasteners. Our parts are high-quality, at low prices, shipped from stock. We also feature a full line of USA-made fasteners, including Grade 5 and Grade 8 hex cap screws, sockets, stainless products, nuts, and washers.FASTENER SPECIFICATIONSPart #: 0000-112238Part Name: 5/16''-18 x 1'' (FT) Square Head Set Screw Cup PointFastener Type: Square Head Set Screw Cup PointSize Description: 5/16''-18 x 1''


Square Head Set Screw, Dog - Half, 1/2-13 x 2 1/2", Alloy Steel Case Hardened, Black Oxide, Full Thread (Quantity: 50) Coarse Thread, 1/2 inch Square Head Bolts, Length: 2 1/2 inch
By Newport Fasteners
In Stock
$97.99

mpn: 137800, ean: 8945135954878,

4.2 out of 5 stars with 45 reviews
Dog Point set screws are considered headless screws that that are threaded the entire length. They have an internal hexagonal drive at one end and a full or half-dog point at the other. One of the main advantages dog point set screws have over cup point set screws is they won't cut into the shaft and damage it or the component.Thread: Coarse / Full Thread / Case Hardened / Black Oxide. Thread Diameter-Pitch: 1/2-13, Length: 2 1/2 inch. Coarse Thread. Black Oxide is not a protective finish


Kreg Tool SML-C1-1200 1 Inch Washer Head 1200ct
By KREG
In Stock
$46.80

mpn: SML-C1 - 1000, ean: 0647096413132,

4.4 out of 5 stars with 91 reviews
Kreg's self-tapping screws were designed for its famous pocket-hole joinery, but that's not all they're good for. Kreg's self-tapping auger point eliminates time-consuming pre-drilling, and these screws are made from the highest quality steel, case-hardened and coated with a dri-lube finish. That means less driving torque for you. This coarse-thread screw has a larger thread diameter and provides greater holding power when driving a screw into soft material such as plywood, particle board, MDF,


Square Head Set Screw, Dog - Half, 5/8-11 x 3 1/2", Alloy Steel Case Hardened, Black Oxide, Full Thread (Quantity: 25) Coarse Thread, 5/8 inch Square Head Bolts, Length: 3 1/2 inch
By Newport Fasteners
In Stock
$94.99

mpn: 567127, ean: 8945135955028,

4.0 out of 5 stars with 143 reviews
Dog Point set screws are considered headless screws that that are threaded the entire length. They have an internal hexagonal drive at one end and a full or half-dog point at the other. One of the main advantages dog point set screws have over cup point set screws is they won't cut into the shaft and damage it or the component.Thread: Coarse / Full Thread / Case Hardened / Black Oxide. Thread Diameter-Pitch: 5/8-11, Length: 3 1/2 inch. Coarse Thread. Black Oxide is not a protective finish


Kreg Pocket-Hole Screw 3/4" Thck No.8x1-1/4" Washer Head #2 Square 500 Count
By Kreg
In Stock
$48.75

mpn: FBA_SML-C125-500,

4.1 out of 5 stars with 69 reviews
Sheet metal screws are designed for joining thin pieces of metal to wood, fiberglass or metal, Great for general repair around the house, Zinc Plated .Kreg Pocket-Hole Screw 3/4 '' Thick No.8x1-1/4 '' Washer Head #2 Square 500 Count..


Set Screws Square Head - Stainless Steel (18-8) 3/8"-16 x 1" - (Quantity: 100) - Grub-Blind-Allen-Headless Screw
By Jet Fitting & Supply Corp
In Stock
$71.59

mpn: JB408072C-100, ean: 7435527676668,

4.5 out of 5 stars with 141 reviews
Jet Fitting and Supply Corporation has been working with Set Screw - Grub Screws - Blind Screws - Headless Screws since 1946. We provide high quality Socket Set Screw, Metric Set Screws, Imperial Set Screws in an assortment of material including Alloy Steel, Stainless Steel 18-8, Stainless Steel 316, Brass, Case Hardened Set Screws and manufactured with Strict Adhereance to all Specifications as dictated by the Industrial Engineering standardsSet Screws Square Head.


Square Head Set Screw, Dog - Half, 5/8-11 x 2 1/4", Alloy Steel Case Hardened, Black Oxide, Full Thread (Quantity: 25) Coarse Thread, 5/8 inch Square Head Bolts, Length: 2 1/4 inch
By Newport Fasteners
In Stock
$68.99

mpn: 277591, ean: 8945135954991,

4.6 out of 5 stars with 119 reviews
Dog Point set screws are considered headless screws that that are threaded the entire length. They have an internal hexagonal drive at one end and a full or half-dog point at the other. One of the main advantages dog point set screws have over cup point set screws is they won't cut into the shaft and damage it or the component.Thread: Coarse / Full Thread / Case Hardened / Black Oxide. Thread Diameter-Pitch: 5/8-11, Length: 2 1/4 inch. Coarse Thread. Black Oxide is not a protective finish



Viewing Page 2 of 6

View more products in Bolts.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - sunnydoors.com. All Rights Reserved.