Wedge Anchors - Page 2 - Mega Sale! Save up to 26%


Mega Sale! Up to 26% off on Wedge Anchors at Sunny Doors, Page 2. Top brands include CONFAST, MKT, ITW Ramset Red Head, Simpson Strong-Tie, Anchor Dog, RAW PRODUCTS CORP, ITW Red Head, & Hillman. Hurry! Limited time offers. Offers valid only while supplies last.



CONFAST 1/2" x 4-1/4" Wedge Anchor Zinc Plated (Box of 25)
By CONFAST
In Stock
$19.99

mpn: WA12414,

4.0 out of 5 stars with 40 reviews
ApplicationsThe anchor is made from Carbon Steel, and is Zinc Plated. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Dry environment.Hole Diameter/Bit DiameterThe anchor requires a 1/2'' hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor The diameter of the


CONFAST 3/4" x 12" Wedge Anchor Zinc Plated (Box of 10)
By CONFAST
In Stock
$37.99

mpn: WA3412,

4.8 out of 5 stars with 14 reviews
ApplicationsThe anchor is made from Carbon Steel, and is Zinc Plated. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Dry environment.Hole Diameter/Bit DiameterThe anchor requires a 3/4'' hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor The diameter of the


MKT 261431SP Sup-R-Stud Zinc Wedge Anchor, 1/4" x 3-1/4" (Pack of 20)
By MKT
In Stock
$17.68
$17.60

mpn: 261431SP, ean: 0082275551746,

4.1 out of 5 stars with 83 reviews
MKT Fastening Sup-R-Stud mechanical wedge anchor is made of Carbon Steel. Required hole diameter equals anchor diameter. Excellent for setting immediately. Can be loaded immediately. Can be set in a bottomless hole. Simple installation. Nut and washer supplied in package. Concerns: Do not use in brick or block, not advised for use where vibratory loads are high, oversize holes are detrimental and will reduce load performance. Approvals/listings: G.S.A. Spec FF-S-325C, Group II, Type 4, Class 1.


Red Head WS-3454 Trubolt Carbon Steel Wedge 3/4-Inch by 5-1/2-Inch Anchor (10 per Box)
By ITW Ramset Red Head
In Stock
$31.99

mpn: IRHWS3454, ean: 0662520019926,

4.0 out of 5 stars with 109 reviews
Designed for fastening applications in solid concrete. Corrosion resistant. Anchors are building code approved.Size: 3/4-inch, length: 5-1/2-inch, quantity: 10. Durable. Easy to set. Use to connect wood frame to concrete.


Simpson Strong Tie THD50500H 1/2-Inch by 5-Inch Titen HD Zinc Plated Heavy Duty Screw Anchor for Concrete/Masonry, 20 per Pack
By Simpson Strong-Tie
In Stock
$42.99
$35.99
You Save: 16%

mpn: THD50500H, ean: 0707392708414,

4.5 out of 5 stars with 144 reviews
The Titen HD anchor is a patented, high strength screw for concrete and masonry. It is design for cracked and uncracked concrete; a requirement that the 2009 IBC places on post-installed anchors. The self-cutting, non-expansion characteristics of the Titen HD anchor make it ideal for structural applications, even at reduced edge distances and spacings. Recommended for permanent dry, interior non-corrosive environments or temporary outdoor applications.Easy post-installation inspection head


CONFAST 3/8 x 3-3/4 Wedge Anchor Zinc Plated (Box of 50)
By CONFAST
In Stock
$14.89

mpn: WA38334,

4.2 out of 5 stars with 84 reviews
ApplicationsThe anchor is made from Carbon Steel, and is Zinc Plated. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Dry environment.Hole Diameter/Bit DiameterThe anchor requires a 3/8'' hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor The diameter of the


9/16" Driver for 3/8" Wedge Anchors
By Anchor Dog
In Stock
$79.99

mpn: AD5625, ean: 0602003982903,

4.0 out of 5 stars with 61 reviews
Anchor Dog Drivers were developed by construction workers to set wedge anchors more efficiently. Forged in high strength tool steel and heat treated for durability. Designed to let the drill do the work - quicker, safer and without damaging the anchors. This product will pay for itself.Made in the USA. Quick and Easy way to set Wedge Anchors. For use with all brands of SDS+ Rotary Hammers Drills with Chipping Function. Drives Anchors in on Hammer Setting and Tightens on Drill Setting. Drives


CONFAST American Made 1/2" x 5-1/2" Zinc Plated Wedge Anchor (25 per box)
By CONFAST
In Stock
$29.50

mpn: TS12512,

4.8 out of 5 stars with 108 reviews
ApplicationsThe anchor is made from Carbon Steel, and is Zinc Plated and meets the Buy America Act (BAA). This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Dry environment.Hole Diameter/Bit DiameterThe anchor requires a 1/2'' hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer


Simpson Strong Tie THD50800H 1/2-Inch by 8-Inch Titen HD Zinc Plated Heavy Duty Screw Anchor for Concrete/Masonry, 20 per Pack
By Simpson Strong-Tie
In Stock
$75.58
$66.99
You Save: 11%

mpn: THD50800H, ean: 0707392237914,

4.1 out of 5 stars with 22 reviews
The Titen HD anchor is a patented, high strength screw for concrete and masonry. It is design for cracked and uncracked concrete; a requirement that the 2009 IBC places on post-installed anchors. The self-cutting, non-expansion characteristics of the Titen HD anchor make it ideal for structural applications, even at reduced edge distances and spacings. Recommended for permanent dry, interior non-corrosive environments or temporary outdoor applications.Easy post-installation inspection head


Simpson Strong Tie Wa75120 3/4-Inch by 12-Inch with 6-Inch Thread Length Zinc Plated Steel Wedge-All Anchor, 5-Piece
By Simpson Strong-Tie
In Stock
$34.00
$26.99
You Save: 21%

mpn: WA75120, ean: 0044315525919,

4.1 out of 5 stars with 110 reviews
The Wedge-All wedge anchors are a non-bottom bearing, wedge style expansion anchor for use in solid concrete or grout-filled concrete masonry. A one-piece clip ensures uniform holding capacity that increases as tension is applied.One piece wrap around clip. Threaded end is chamfered for ease of starting nut. Length identification head marks.


Strong Bolt STB2-62100 Wedge Anchor 5/8-Inch by 10-Inch, 10 per box
By Simpson Strong-Tie
In Stock
$33.10
$29.99
You Save: 9%

mpn: STB2-62100, ean: 0707392583523,

4.8 out of 5 stars with 111 reviews
The Strong-Bolt 2 wedge anchor is the next generation solution for cracked and uncracked concrete. Following rigorous testing according to ICC-ES acceptance criteria, the Strong-Bolt 2 anchor received classification as a Category 1 anchor, the highest attainable anchor category for performance in cracked concrete under static and seimic loading. Code listed by ICC-ES under the 2009 IBC requirements for post-installed anchors in cracked and uncracked concrete.Tri-segmented clip. Dual embossments


CONFAST 1/2 x 3-3/4 Stainless Steel Wedge Anchor (25 per box)
By CONFAST
In Stock
$52.99

mpn: WAS12334,

4.2 out of 5 stars with 23 reviews
ApplicationsThe anchor is made from 304 Stainless Steel. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Wet environment.Hole Diameter/Bit DiameterThe anchor requires a 1/2'' hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor The diameter of the anchor is


Wedge Anchor 304 Stainless Steel - 1/4"-20 x 3-1/4" Qty-10
By RAW PRODUCTS CORP
In Stock
$17.25

mpn: 618930261868, ean: 0618930261868,

4.9 out of 5 stars with 39 reviews
Wedge Anchor 304 Stainless Steel - 1/4''-20 x 3-1/4'' Qty-10Wedge anchors, concrete anchors, or masonry anchors are designed to be installed into solid concrete.. Wedge anchors can be used to fasten objects to concrete.. These anchors can be used for some of the following concrete applications: shelving, railing, duct work, signs, electric pipe, light fixtures, escalators, etc.. Wedge anchors cannot be used on brick or block..


CONFAST 1/4 x 3-1/4 Wedge Anchor Zinc Plated (Box of 100)
By CONFAST
In Stock
$23.99

mpn: WA14314,

4.2 out of 5 stars with 145 reviews
ApplicationsThe anchor is made from Carbon Steel, and is Zinc Plated. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Dry environment.Hole Diameter/Bit DiameterThe anchor requires a 1/4'' hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor The diameter of the


Strong Bolt STB2-37700 Wedge Anchor 3/8-Inch by 7-Inch, 50-Piece
By Simpson Strong-Tie
In Stock
$60.67
$57.54
You Save: 5%

mpn: STB2-37700, ean: 0707392843023,

4.4 out of 5 stars with 105 reviews
The Strong-Bolt 2 wedge anchor is the next generation solution for cracked and uncracked concrete. Following rigorous testing according to ICC-ES acceptance criteria, the Strong-Bolt 2 anchor received classification as a Category 1 anchor, the highest attainable anchor category for performance in cracked concrete under static and seimic loading. Code listed by ICC-ES under the 2009 IBC requirements for post-installed anchors in cracked and uncracked concrete.Tri-segmented clip. Dual embossments


Strong Bolt STB2-62700 Wedge Anchor 5/8-Inch by 7-Inch, 20-Piece
By Simpson Strong-Tie
In Stock
$41.43

mpn: STB2-62700, ean: 0707392252122,

4.5 out of 5 stars with 92 reviews
The Strong-Bolt 2 wedge anchor is the next generation solution for cracked and uncracked concrete. Following rigorous testing according to ICC-ES acceptance criteria, the Strong-Bolt 2 anchor received classification as a Category 1 anchor, the highest attainable anchor category for performance in cracked concrete under static and seimic loading. Code listed by ICC-ES under the 2009 IBC requirements for post-installed anchors in cracked and uncracked concrete.Tri-segmented clip. Dual embossments


Red Head CWS-3836 Carbon Steel Seismic Wedge 3/8-Inch by 3-3/4-Inch Anchor (50 per Box)
By ITW Red Head
In Stock
$50.00

mpn: CWS-3836, ean: 0662520195750,

4.2 out of 5 stars with 103 reviews
ITW Red Head CWS-3830, 3/8'' x 3'' Trubolt Seismic Wedge Anchor Trubolt+® Wedge anchors consist of a high-strength threaded stud body, expansion clip, nut and washer. Anchor bodies are made of plated carbon steel. The expansion clip consists of a split cylindrical ring with undercutting grooves. The exposed end of the anchor is stamped to identify anchor length. Stampings should be preserved during installation for any subsequent embedment verification. Use carbide tipped hammer drill bits


The Hillman Group 370986 Wedge Anchor, 3/8 X 5-Inch, 10-Pack
By Hillman
In Stock
$15.89

mpn: 370986, ean: 0008236561586,

4.8 out of 5 stars with 114 reviews
The Power-Stud+ SD1 is a fully threaded, torque controlled, wedge expansion anchor that is designed for concrete applications. Suitable base materials are normal-weight and sand-lightweight concrete, concrete over steel deck, and grouted concrete masonry. This anchor has various DOT approvals including Caltrans listing for ''Stud Mechanical Expansion Anchors''. Building code approved.Zinc-plated wedge anchors designed for consistent performance in cracked and un-cracked concrete. Suitable base


Simpson Strong Tie Wa75812 3/4-Inch by 8-1/2-Inch with 6-Inch Thread Length Zinc Plated Steel Wedge-All Anchor, 10-Piece
By Simpson Strong-Tie
In Stock
$33.47
$26.34
You Save: 21%

mpn: WA75812, ean: 0044315313516,

4.7 out of 5 stars with 82 reviews
The Wedge-All wedge anchors are a non-bottom bearing, wedge style expansion anchor for use in solid concrete or grout-filled concrete masonry. A one-piece clip ensures uniform holding capacity that increases as tension is applied.One piece wrap around clip. Threaded end is chamfered for ease of starting nut. Length identification head marks.


Simpson Strong Tie Wa50700 1/2-Inch by 7-Inch with 4-9/16-Inch Thread Length Zinc Plated Steel Wedge-All Anchor, 25-Piece
By Simpson Strong-Tie
In Stock
$26.15
$19.30
You Save: 26%

mpn: WA50700, ean: 0044315835612,

4.7 out of 5 stars with 29 reviews
The Wedge-All wedge anchors are a non-bottom bearing, wedge style expansion anchor for use in solid concrete or grout-filled concrete masonry. A one-piece clip ensures uniform holding capacity that increases as tension is applied.One piece wrap around clip. Threaded end is chamfered for ease of starting nut. Length identification head marks.



Viewing Page 2 of 5

View more products in Anchors.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - sunnydoors.com. All Rights Reserved.