Wedge Anchors - Page 3 - Super Savings! Save up to 39%


Super Savings! Up to 39% off on Wedge Anchors at Sunny Doors, Page 3. Top brands include RAW PRODUCTS CORP, HUSQVARNA, Powers Fastening Innovations, Simpson Strong-Tie, CONFAST, Lexar Industrial, ITW/RedHead, MKT, D.I.D., & The Hillman Group. Hurry! Limited time offers. Offers valid only while supplies last.



Wedge Anchor 304 Stainless Steel - 3/8''-16 x 3'' Qty-10
Wedge Anchor 304 Stainless Steel - 3/8"-16 x 3" Qty-10
By RAW PRODUCTS CORP
In Stock
$27.15

mpn: 618930261899, ean: 0618930261899,

4.2 out of 5 stars with 8 reviews
Wedge Anchor 304 Stainless Steel - 3/8''-16 x 3'' Qty-10Wedge anchors, concrete anchors, or masonry anchors are designed to be installed into solid concrete.. Wedge anchors can be used to fasten objects to concrete.. These anchors can be used for some of the following concrete applications: shelving, railing, duct work, signs, electric pipe, light fixtures, escalators, etc.. Wedge anchors cannot be used on brick or block..


Husqvarna 12'' Wood Grain Felling Wedge 608201002 by HUSQVARNA
Husqvarna 12" Wood Grain Felling Wedge 608201002 by HUSQVARNA
By HUSQVARNA
In Stock
$13.05

mpn: 608201002,

4.4 out of 5 stars with 118 reviews
A must-have when felling trees. Wedges help the tree fall in the direction of the notch cut by actually lifting the tree in that direction. Used to prevent the tree from pinching the saw (or leaning back on the saw) while making a backcut. Also can be used for bucking trees already on the ground. Made of high impact ABS plastic..


Powers Fastening Innovations 7422SD1 Power-Stud and Sd1 1/2-Inch by 3-3/4-Inch Type Carbon Steel Wedge Expansion Anchor Carbon Steel Clip, 50 Per Box
Powers Fastening Innovations 7422SD1 Power-Stud and Sd1 1/2-Inch by 3-3/4-Inch Type Carbon Steel Wedge Expansion Anchor Carbon Steel Clip, 50 Per Box
By Powers Fastening Innovations
In Stock
$54.46

mpn: 7422SD1, ean: 0075352776071,

4.1 out of 5 stars with 50 reviews
Powers Fasteners is the leading supplier of concrete and masonry anchors in North America and has been a leader in the fastening industry since 1921. Powers is an ISO-9001 international anchoring products company with extensive expertise in the following groups: Mechanical Anchors, Adhesive, Light Duty, Roofing and Carbide Drill Bits.Fully threaded, torque-controlled, wedge expansion anchor. Designed for consistent performance in cracked and untracked concrete. Powers Fastening Innovations.


Simpson Strong Tie THD37400H 3/8-Inch by 4-Inch Titen HD Zinc Plated Heavy Duty Screw Anchor for Concrete/Masonry, 50 per Pack
Simpson Strong Tie THD37400H 3/8-Inch by 4-Inch Titen HD Zinc Plated Heavy Duty Screw Anchor for Concrete/Masonry, 50 per Pack
By Simpson Strong-Tie
In Stock
$51.57
$36.82
You Save: 29%

mpn: THD37400H, ean: 0707392379218,

4.8 out of 5 stars with 73 reviews
The Titen HD anchor is a patented, high strength screw for concrete and masonry. It is design for cracked and uncracked concrete; a requirement that the 2009 IBC places on post-installed anchors. The self-cutting, non-expansion characteristics of the Titen HD anchor make it ideal for structural applications, even at reduced edge distances and spacings. Recommended for permanent dry, interior non-corrosive environments or temporary outdoor applications.Easy post-installation inspection head


CONFAST 3/4'' x 12'' Hot-Dipped Galvanized Wedge Anchor (Box of 10)
CONFAST 3/4" x 12" Hot-Dipped Galvanized Wedge Anchor (Box of 10)
By CONFAST
In Stock
$95.99

mpn: WAG3412,

4.1 out of 5 stars with 82 reviews
ApplicationsThe anchor is made from Carbon Steel, and is Hot-Dipped Galvanized. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Damp environment.Hole Diameter/Bit DiameterThe anchor requires a 3/4'' hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor The diameter


Powers Fastening Innovations 07312 Power-Stud 3/8-Inch by 2-3/4-Inch Type 304 Stainless Steel Wedge Expansion Anchor, 50 Per Box
Powers Fastening Innovations 07312 Power-Stud 3/8-Inch by 2-3/4-Inch Type 304 Stainless Steel Wedge Expansion Anchor, 50 Per Box
By Powers Fastening Innovations
In Stock
$58.33
$56.25
You Save: 4%

mpn: 07312, ean: 0075352073125,

4.7 out of 5 stars with 36 reviews
Powers Fasteners is the leading supplier of concrete and masonry anchors in North America and has been a leader in the fastening industry since 1921. Powers is an ISO-9001 international anchoring products company with extensive expertise in the following groups: Mechanical Anchors, Adhesive, Light Duty, Roofing and Carbide Drill Bits.Fully threaded, wedge style anchor. Available in carbon steel and stainless steel. Powers Fastening Innovations.


Simpson Strong Tie Wa62600 5/8-Inch by 6-Inch with 4-3/8-Inch Thread Length Zinc Plated Steel Wedge-All Anchor, 20-Piece
Simpson Strong Tie Wa62600 5/8-Inch by 6-Inch with 4-3/8-Inch Thread Length Zinc Plated Steel Wedge-All Anchor, 20-Piece
By Simpson Strong-Tie
In Stock
$33.45
$22.51
You Save: 33%

mpn: WA62600, ean: 0044315062018,

4.4 out of 5 stars with 91 reviews
The Wedge-All wedge anchors are a non-bottom bearing, wedge style expansion anchor for use in solid concrete or grout-filled concrete masonry. A one-piece clip ensures uniform holding capacity that increases as tension is applied.One piece wrap around clip. Threaded end is chamfered for ease of starting nut. Length identification head marks.


(10) Galvanized Concrete Wedge Anchor Bolts 1/2 x 10 Includes Nuts & Washers
(10) Galvanized Concrete Wedge Anchor Bolts 1/2 x 10 Includes Nuts & Washers
By Lexar Industrial
In Stock
$28.99

mpn: 361686181126,

4.8 out of 5 stars with 37 reviews
Lot of (10) wedge anchor bolts. These galvanized anchors are 1/2-13 thread and are 10'' in length. Nuts and flat washers are included.Thread Diameter: 1/2-13. Length: 10. Finish: Galvanized.


CONFAST 7/8'' x 6'' Wedge Anchor Zinc Plated (Box of 5)
CONFAST 7/8" x 6" Wedge Anchor Zinc Plated (Box of 5)
By CONFAST
In Stock
$21.99

mpn: WA786,

4.3 out of 5 stars with 26 reviews
ApplicationsThe anchor is made from Carbon Steel, and is Zinc Plated. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Dry environment.Hole Diameter/Bit DiameterThe anchor requires a 7/8'' hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor The diameter of the


Strong Bolt STB2-50512 Wedge Anchor 1/2-Inch by 5-1/2-Inch, 25-Piece
Strong Bolt STB2-50512 Wedge Anchor 1/2-Inch by 5-1/2-Inch, 25-Piece
By Simpson Strong-Tie
In Stock
$34.57
$25.85
You Save: 25%

mpn: STB2-50512, ean: 0707392648529,

4.0 out of 5 stars with 64 reviews
The Strong-Bolt 2 wedge anchor is the next generation solution for cracked and uncracked concrete. Following rigorous testing according to ICC-ES acceptance criteria, the Strong-Bolt 2 anchor received classification as a Category 1 anchor, the highest attainable anchor category for performance in cracked concrete under static and seimic loading. Code listed by ICC-ES under the 2009 IBC requirements for post-installed anchors in cracked and uncracked concrete.Tri-segmented clip. Dual embossments


CONFAST 1/2 x 3-3/4 Hot-Dipped Galvanized Wedge Anchor (Box of 25)
CONFAST 1/2 x 3-3/4 Hot-Dipped Galvanized Wedge Anchor (Box of 25)
By CONFAST
In Stock
$35.99

mpn: WAG12334,

4.5 out of 5 stars with 148 reviews
ApplicationsThe anchor is made from Carbon Steel, and is Hot-Dipped Galvanized. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Damp environment.Hole Diameter/Bit DiameterThe anchor requires a 1/2'' hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor The diameter


ITW Red Head Trubolt+ TB4C-1236 1/2'' x 3-3/4'' Seismic and Cracked/Uncracked Carbon Steel Wedge Anchor Zinc Plated (25 per box) Replaces WS-1236
ITW Red Head Trubolt+ TB4C-1236 1/2" x 3-3/4" Seismic and Cracked/Uncracked Carbon Steel Wedge Anchor Zinc Plated (25 per box) Replaces WS-1236
By ITW/RedHead
In Stock
$27.09

mpn: TB4C-1236,

4.0 out of 5 stars with 111 reviews
ApplicationsThe anchor is made from Carbon Steel, and is Zinc Plated. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Dry environment.Head Style The anchor is a head Hole Diameter/Bit DiameterThe anchor requires a 1/2'' hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of


Strong Bolt STB2-37500 Wedge Anchor 3/8-Inch by 5-Inch, 50-Piece
Strong Bolt STB2-37500 Wedge Anchor 3/8-Inch by 5-Inch, 50-Piece
By Simpson Strong-Tie
In Stock
$32.20
$19.72
You Save: 39%

mpn: STB2-37500, ean: 0707392258902,

4.2 out of 5 stars with 31 reviews
The Strong-Bolt 2 wedge anchor is the next generation solution for cracked and uncracked concrete. Following rigorous testing according to ICC-ES acceptance criteria, the Strong-Bolt 2 anchor received classification as a Category 1 anchor, the highest attainable anchor category for performance in cracked concrete under static and seimic loading. Code listed by ICC-ES under the 2009 IBC requirements for post-installed anchors in cracked and uncracked concrete.Tri-segmented clip. Dual embossments


MKT 261251SP Sup-R-Stud Zinc Wedge Anchor, 1/2'' x 5-1/2'' (Pack of 10)
MKT 261251SP Sup-R-Stud Zinc Wedge Anchor, 1/2" x 5-1/2" (Pack of 10)
By MKT
In Stock
$16.72

mpn: 261251SP, ean: 0082275551838,

4.7 out of 5 stars with 64 reviews
MKT Fastening Sup-R-Stud mechanical wedge anchor is made of Carbon Steel. Required hole diameter equals anchor diameter. Excellent for setting immediately. Can be loaded immediately. Can be set in a bottomless hole. Simple installation. Nut and washer supplied in package. Concerns: Do not use in brick or block, not advised for use where vibratory loads are high, oversize holes are detrimental and will reduce load performance. Approvals/listings: G.S.A. Spec FF-S-325C, Group II, Type 4, Class 1.


Power Wedge Slab Separator - Pack of 2
Power Wedge Slab Separator - Pack of 2
By D.I.D.
In Stock
$45.80

ean: 0630125230930,

4.7 out of 5 stars with 43 reviews
The Power Wedge makes clamping easier and safer. It also decreases the likelihood of employee injuries, and helps move slabs more efficiently by increasing the distance between slabs so clamps are more easily inserted. The Power Wedge can also be used for separating an installed slab. The reinforced base is designed so you can insert it between the edge of the granite counter top and the cabinet or substrate (either plywood or a cement fiberboard substrate). You can then use a hammer on the


ITW/RedHead TB4G-3836 3/8'' x 3-3/4'' Trubolt+ Galvanized Wedge Anchor (50 per Box)
ITW/RedHead TB4G-3836 3/8" x 3-3/4" Trubolt+ Galvanized Wedge Anchor (50 per Box)
By ITW/RedHead
In Stock
$69.99

mpn: TB4G-3836,

4.9 out of 5 stars with 91 reviews
ApplicationsThe anchor is made from Carbon Steel, and is Zinc Plated. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Moist environment.Head Style The anchor is a head Hole Diameter/Bit DiameterThe anchor requires a 3/8'' hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter


CONFAST 3/8'' x 3'' Stainless Steel Wedge Anchor (50 per Box)
CONFAST 3/8" x 3" Stainless Steel Wedge Anchor (50 per Box)
By CONFAST
In Stock
$60.99

mpn: WAS383,

4.9 out of 5 stars with 51 reviews
ApplicationsThe anchor is made from 304 Stainless Steel. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Wet environment.Hole Diameter/Bit DiameterThe anchor requires a 3/8'' hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor The diameter of the anchor is 3/8''.Le


CONFAST 1/2 x 2-3/4 Hot-Dipped Galvanized Wedge Anchor (Box of 25)
CONFAST 1/2 x 2-3/4 Hot-Dipped Galvanized Wedge Anchor (Box of 25)
By CONFAST
In Stock
$22.09

mpn: WAG12234,

4.0 out of 5 stars with 47 reviews
ApplicationsThe anchor is made from Carbon Steel, and is Hot-Dipped Galvanized. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Damp environment.Hole Diameter/Bit DiameterThe anchor requires a 1/2'' hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor The diameter


Simpson Strong Tie THD50400H 1/2-Inch by 4-Inch Titen HD Zinc Plated Heavy Duty Screw Anchor for Concrete/Masonry, 20 per Pack
Simpson Strong Tie THD50400H 1/2-Inch by 4-Inch Titen HD Zinc Plated Heavy Duty Screw Anchor for Concrete/Masonry, 20 per Pack
By Simpson Strong-Tie
In Stock
$44.77
$44.65

mpn: THD50400H, ean: 0707392739616,

4.2 out of 5 stars with 128 reviews
The Titen HD anchor is a patented, high strength screw for concrete and masonry. It is design for cracked and uncracked concrete; a requirement that the 2009 IBC places on post-installed anchors. The self-cutting, non-expansion characteristics of the Titen HD anchor make it ideal for structural applications, even at reduced edge distances and spacings. Recommended for permanent dry, interior non-corrosive environments or temporary outdoor applications.Easy post-installation inspection head


The Hillman Group 370983 Wedge Anchor, 3/8 X 2-3/4-Inch, 25-Pack
The Hillman Group 370983 Wedge Anchor, 3/8 X 2-3/4-Inch, 25-Pack
By The Hillman Group
In Stock
$20.99
$20.69
You Save: 1%

mpn: 370983, ean: 0008236433395,

4.0 out of 5 stars with 86 reviews
The Power-Stud is a torque controlled, wedge expansion anchor that is designed for concrete applications. Has various DOT approvals including Cal Trans listing for ''Stud Mechanical Expansion Anchors''. It is building code approved and can also be used with treated lumber.Made of Steel/Zinc. Includes nut and washer. Use in solid concrete, brick and stone.



Viewing Page 3 of 5

View more products in Anchors.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - sunnydoors.com. All Rights Reserved.