Wedge Anchors - Page 4 - Super Savings! Save up to 35%


Super Savings! Up to 35% off on Wedge Anchors at Sunny Doors, Page 4. Top brands include CONFAST, ITW, Simpson Strong-Tie, Lexar Industrial, S.R. Smith, BICMTE, The Hillman Group, Wej-It, & N. Fasteners. Hurry! Limited time offers. Offers valid only while supplies last.



CONFAST 1/2" x 4-1/4" Stainless Steel Wedge Anchor (25 per Box)
By CONFAST
In Stock
$64.99

mpn: WAS12414,

4.3 out of 5 stars with 105 reviews
ApplicationsThe anchor is made from 304 Stainless Steel. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Wet environment.Hole Diameter/Bit DiameterThe anchor requires a 1/2'' hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor The diameter of the anchor is 1/2''.Le


ITW 11016 Red Head Wedge Anchor 3/8 in. x 3-3/4 in, 15-per Pack
By ITW
SKU: #HH-19405174
In Stock
$23.09
$19.99
You Save: 13%

sku: HH-19405174, mpn: 11016, ean: 0092097110168,

4.6 out of 5 stars with 37 reviews
Designed for fastening applications in solid concrete. Corrosion resistant. Anchors are building code approved.Ideal for attaching sill plates, electrical equipment and structural supports. Fastens into solid concrete. Corrosion resistant. One piece stainless steel expander clip. Supplied complete with nut and washer.


CONFAST 3/4" x 7" Wedge Anchor Zinc Plated (Box of 10)
By CONFAST
In Stock
$33.99

mpn: WA347,

4.8 out of 5 stars with 108 reviews
ApplicationsThe anchor is made from Carbon Steel, and is Zinc Plated. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Dry environment.Hole Diameter/Bit DiameterThe anchor requires a 3/4'' hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor The diameter of the ancho


Simpson Strong Tie THDB62400H 5/8-Inch by 4-Inch Titen HD Screw Anchor, 10 Per Box
By Simpson Strong-Tie
In Stock
$36.53

mpn: THDB62400H, ean: 0707392521020,

4.6 out of 5 stars with 60 reviews
The Titen HD anchor is a patented, high-strength screw anchor for concrete and masonry. It is designed for optimum performance in both cracked and uncracked concrete; a requirement that the 2009 IBC places on post-installed anchors. The high strength, easy to install Titen HD anchor has been tested and shown to provice outstanding performance in cracked and uncracked concrete under both static and seismic loading conditions. The self-undercutting, non-expansion characteristics of the Titen HD


CONFAST 1/2" x 5-1/2" Wedge Anchor Zinc Plated (Box of 25)
By CONFAST
In Stock
$23.99

mpn: WA12512,

4.2 out of 5 stars with 18 reviews
ApplicationsThe anchor is made from Carbon Steel, and is Zinc Plated. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Dry environment.Hole Diameter/Bit DiameterThe anchor requires a 1/2'' hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor The diameter of the


CONFAST 7/8" x 6" Hot-Dipped Galvanized Wedge Anchor (Box of 5)
By CONFAST
In Stock
$25.00

mpn: WAG786,

4.6 out of 5 stars with 69 reviews
ApplicationsThe anchor is made from Carbon Steel, and is Hot-Dipped Galvanized. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Damp environment.Hole Diameter/Bit DiameterThe anchor requires a 7/8'' hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor The diameter


Simpson Strong Tie THDB62600H 5/8-Inch by 6-Inch Titen HD Screw Anchor, 10 Per Box
By Simpson Strong-Tie
In Stock
$35.88

mpn: THDB62600H, ean: 0707392771821,

4.5 out of 5 stars with 19 reviews
The Titen HD anchor is a patented, high-strength screw anchor for concrete and masonry. It is designed for optimum performance in both cracked and uncracked concrete; a requirement that the 2009 IBC places on post-installed anchors. The high strength, easy to install Titen HD anchor has been tested and shown to provice outstanding performance in cracked and uncracked concrete under both static and seismic loading conditions. The self-undercutting, non-expansion characteristics of the Titen HD


Simpson Strong Tie Wa75700 3/4-Inch by 7-Inch with 5-1/8-Inch Thread Length Zinc Plated Steel Wedge-All Anchor, 10-Piece
By Simpson Strong-Tie
In Stock
$30.13
$19.64
You Save: 35%

mpn: WA75700, ean: 0044315612312,

4.2 out of 5 stars with 52 reviews
The Wedge-All wedge anchors are a non-bottom bearing, wedge style expansion anchor for use in solid concrete or grout-filled concrete masonry. A one-piece clip ensures uniform holding capacity that increases as tension is applied.One piece wrap around clip. Threaded end is chamfered for ease of starting nut. Length identification head marks.


Strong Bolt STB2-50700 Wedge Anchor 1/2-Inch by 7-Inch, 25-Piece
By Simpson Strong-Tie
In Stock
$27.78
$27.75

mpn: STB2-50700, ean: 0707392176022,

4.1 out of 5 stars with 131 reviews
The Strong-Bolt 2 wedge anchor is the next generation solution for cracked and uncracked concrete. Following rigorous testing according to ICC-ES acceptance criteria, the Strong-Bolt 2 anchor received classification as a Category 1 anchor, the highest attainable anchor category for performance in cracked concrete under static and seimic loading. Code listed by ICC-ES under the 2009 IBC requirements for post-installed anchors in cracked and uncracked concrete.Tri-segmented clip. Dual embossments


(8) Concrete Wedge Anchor Bolts 3/4 x 7 Includes Nuts & Washers
By Lexar Industrial
In Stock
$29.99

mpn: 361475688012,

4.2 out of 5 stars with 53 reviews
Lot of (8) wedge anchor bolts. These zinc plated anchors are 3/4-10 thread and are 7'' in length. Nuts and flat washers are included.Thread Diameter: 3/4-10. Anchor Length: 7. Drill Size: 3/4. Finish: Zinc.


S.R. Smith AS-100B 4-Inch Anchor for 1.90-Inch Outer Diameter Tubing, Bronze
By S.R. Smith
In Stock
$35.45
$33.89
You Save: 4%

mpn: AS-100B, ean: 0840671115340,

4.9 out of 5 stars with 60 reviews
S.R. Smith's 4-Inch deep cast bronze anchor socket assembly provides a suitable mounting point for most residential and many moderate to heavy duty commercial rail and ladder products that use 1.90-Inch outer diameter tubing. The anchor is tapped for and is provided with a 1/4-20 UNC brass ground screw for bonding. Fixtures are secured in The anchor by means of a wedge assembly consisting of a cast bronze wedge tapped for a 5/16-Inch 1.25-Inch long bolt and washer.4'' Deep, Bronze anchor for use


Drywall Anchor kit - Hollow Wall Anchors with Screws ,self-Drilling Hollow Wall Anchor, for Drywall,Nylon - Plastic - Buildex,100 pcs
By BICMTE
In Stock
$13.99

mpn: BT-1108-01, ean: 0705020212708,

4.9 out of 5 stars with 59 reviews
Product description: Material: plastic + steel Quantity: 50 plastic anchor + 50pcs screw (total 100pcs) Product Name: Plastic expansion plug Size: 1.18*0.8*1.9in/0.29in Color: White Uses: for screws fixed on the wall, strong bonding Scope of application: Gypsum board, fiberboard, hollow board, etc., for curtains, lamps, cross stitches, frames, frames, ornaments, decorative pieces, etc. Features: Gypsum board wall and hollow wall installation tools are also suitable for installation and hanging


The Hillman Group 376262 Sharkie No.6-12 Anchor, White
By The Hillman Group
In Stock
$2.49

mpn: 376262, ean: 0008236901054,

4.5 out of 5 stars with 26 reviews
These anchors include both the Sharkie expansion wall anchor and the steel round head star drive screw.Plastic Anchor. Uses a 1/4-Inch bit. Holds up to 35Pound (1/2-Inch drywall). 6 pieces per pack.


Wej-It Ankr-TITE AT Wedge Anchor, Carbon Steel, Zinc Plated Finish, Meets QQZ-325Z Type II Class 3 and GSA FFS-325 Group II Type 4 Class 1 Specifications, 5/8" Diameter, 5" Length, 3-1/8" Threaded Length (Pack of 10)
By Wej-It
In Stock
$2.15

mpn: AT5850, ean: 0013918114509,

4.1 out of 5 stars with 17 reviews
Wedge anchor provides a secure hold in solid masonry and uncracked concrete. Anchor consists of a zinc-plated carbon steel body, a zinc-coated steel washer and nut, and a steel clip, which expands to secure the anchor in place as the nut is tightened. Meets Fed. Specs. QQZ-325Z Type II Class 3 and GSA FFS-325 Group II Type 4 Class 1, and complies with Miami-Dade NOA #08-0911.02 code. Ultimate tensile strength is 9,527 lb. at 2-5/8'' embedment depth in 4,000-psi concrete with a static load. Use


The Hillman Group 591278 Ribbed Anchor with Screw, 12-16-Inch, Zinc, 6-Pack
By The Hillman Group
In Stock
$2.49

mpn: 591278, ean: 0038902010162,

4.8 out of 5 stars with 36 reviews
Ribbed plastic anchors light duty anchors and work with various diameter sheet metal screws. Ideal for anchoring in concrete, brick or wallboard. The anchor is corrosion resistant and a pre drilled hole is required.Accomodates screw diameters of 12-16. Pre-drilled hole required. Screws included. 6Pc per pack.


1/4"-20 X 3-1/4" Stainless Steel Wedge Anchor
By N. Fasteners
In Stock
$2.13

mpn: 14314WANSS, ean: 0749273246851,

4.5 out of 5 stars with 37 reviews
1/4''-20 X 3-1/4'' Stainless Steel Wedge Anchor1/4''-20 X 3-1/4'' Stainless Steel Wedge Anchor.


1/2"-13 X 7" Zinc Plated Wedge Anchor
By N. Fasteners
In Stock
$2.27

mpn: 127WAN, ean: 0749273246097,

4.9 out of 5 stars with 36 reviews
1/2''-13 X 7'' Zinc Plated Wedge Anchor1/2''-13 X 7'' Zinc Plated Wedge Anchor.


5/8"-11 X 3-1/2" Zinc Plated Wedge Anchor
By N. Fasteners
In Stock
$2.21

mpn: 58312WAN, ean: 0749273246219,

4.3 out of 5 stars with 43 reviews
5/8''-11 X 3-1/2'' Zinc Plated Wedge Anchor5/8''-11 X 3-1/2'' Zinc Plated Wedge Anchor.


CONFAST 1/2" x 5-1/2" Galvanized Wedge Anchor (Box of 25)
By CONFAST
In Stock
$46.99

mpn: WAG12512,

4.7 out of 5 stars with 16 reviews
ApplicationsThe anchor is made from Carbon Steel, and is Hot-Dipped Galvanized. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Damp environment.Hole Diameter/Bit DiameterThe anchor requires a 1/2'' hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor The diameter o


CONFAST 5/8" x 6" Wedge Anchor Zinc Plated (Box of 20)
By CONFAST
In Stock
$30.99

mpn: WA586,

4.3 out of 5 stars with 16 reviews
ApplicationsThe anchor is made from Carbon Steel, and is Zinc Plated. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Dry environment.Hole Diameter/Bit DiameterThe anchor requires a 5/8'' hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor The diameter of the ancho



Viewing Page 4 of 5

View more products in Anchors.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - sunnydoors.com. All Rights Reserved.